Weld-Craft?

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fowlgunner935

Member
Joined
Mar 7, 2016
Messages
15
Reaction score
0
Anyone with any experience with Weld-Craft? Took my boat in yesterday to get a jackplate put on and motor serviced. After a few minutes with the owner at the boat shop and talked me into a 1652 open floor boat. To my disbelief they gave me $800 for my 1988 Lowe Big Jon.
 
I believe that they have an excellent rep. When I was looking to scrap my 1996 Lowe and replace it, one dealer had a nice, lightly used, 16 foot Weldcraft. I did some research and the manufacturer had a very good reputation.

BUT......The boat was underpowered ( IMHO); flat bottom; and had the seats in the middle. I wanted double the power that that boat had ( with-in the proper ratings, of course); a semi-V; and an open floor plan. I wound up with a 1652 VBW from G3.

I think you are going to be very happy.

richg99
 

Latest posts

Top