I know when I went looking for a tool head to fit an air hammer, I had to look high and low before I found one at a reasonable price - that was sold individually.
For the price of this one, even if someone just wanted to tighten up a few rivets here and these by hand, I'd think they could use a hammer against this tool (wear safety glasses please ... ) as a helper held the head of a heavier hammer or sledge up against the expanded (or to be expanded) rivet tail.
Ballpark ~ $10 + isn't a bad price at all! I recall I paid about $20 for the one I used in my Haba Freight rivet air hammer.
$10 - https://www.harryepstein.com/index.php/ajax-a1620-brazier-head-rivet-set-3-16.html?gclid=Cj0KEQjwh428BRCnvcyI-5nqjY4BEiQAijebwqW7Ib1BL_CBG6QhWTfULRRdUW1DLuyRv2aAbTM14UkaAu538P8HAQ
$13 - https://www.autobodydepot.com/AJX-A1620_2.html#.V4P1dvkrJDM
For the price of this one, even if someone just wanted to tighten up a few rivets here and these by hand, I'd think they could use a hammer against this tool (wear safety glasses please ... ) as a helper held the head of a heavier hammer or sledge up against the expanded (or to be expanded) rivet tail.
Ballpark ~ $10 + isn't a bad price at all! I recall I paid about $20 for the one I used in my Haba Freight rivet air hammer.
$10 - https://www.harryepstein.com/index.php/ajax-a1620-brazier-head-rivet-set-3-16.html?gclid=Cj0KEQjwh428BRCnvcyI-5nqjY4BEiQAijebwqW7Ib1BL_CBG6QhWTfULRRdUW1DLuyRv2aAbTM14UkaAu538P8HAQ
$13 - https://www.autobodydepot.com/AJX-A1620_2.html#.V4P1dvkrJDM