Fish On Fabrications Shout Out

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bobby_bates

Well-known member
Joined
Aug 7, 2014
Messages
78
Reaction score
1
Location
Central Kentucky
I just got some work completed by Dawson at Fish On Fabrications. I have to say that the work was outstanding, and Dawson is a fantastic person to do business with. I am not affiliated with him nor his company, just want to give credit where it's due.
First off, Dawson is a little on the "young side", but do not let that fool you. He is intelligent, has excellent manners in person and on the phone, has has a superior work ethic (something not usually seen in the younger generation).
Second, his work is absolutely top notch. There is no cutting corners with him. You explain what you want done to your boat, and he'll do what is asked, or suggest a better solution. Either way, he'll leave the final decision to you.
Third, this was the first time (in a long while) that I left a shop extremely satisfied with the work completed. Any cuts in the aluminum were ground down or rounded so there were no sharp edges. the fit of the hatches is incredible. And the way he extended the casting deck makes it look from the factory.
So, the reason for this post; if anyone has used Fish On Fabrication for any custom work, give a shout out and show some "before/after" pics. I'll start with mine.
 

Attachments

  • 20160821_183948_resized.jpg
    20160821_183948_resized.jpg
    50.1 KB · Views: 1,132
  • 20160821_183955_resized.jpg
    20160821_183955_resized.jpg
    46.4 KB · Views: 1,133
  • 20160821_184000_resized.jpg
    20160821_184000_resized.jpg
    50.3 KB · Views: 1,132
  • 20160821_184405_resized.jpg
    20160821_184405_resized.jpg
    59.8 KB · Views: 1,133
  • 20160817_105058.jpg
    20160817_105058.jpg
    35.6 KB · Views: 1,133
  • 20160817_105034.jpg
    20160817_105034.jpg
    24.5 KB · Views: 1,133
  • Before 1.jpg
    Before 1.jpg
    46.7 KB · Views: 1,132
  • Before 2.jpg
    Before 2.jpg
    50 KB · Views: 1,132
Looks great!

I also received a custom hatch from Dawson in the mail just last week and it is built excellent. I haven't had a chance to install it yet other than rough fitting it in to make sure all was well which it was. He did fast work and was very reasonably priced IMO. Highly recommend.

Check out the link to my build in my sig and I should have an update for this soon.
 

Latest posts

Top