Jon boat duck blind ideas

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wingz4life2788

New member
Joined
Nov 5, 2016
Messages
4
Reaction score
0
Just bought a jon boat and trying to see if I can utilize what I think is a t-lock rail on the sides to utilize making into a duck blind. Anyone have any ideas or know what this track trim is called? The rail runs the entire length on benches for seat connection and edges of boat.

e12256c045054fa777c537d9e19cfb45.jpg
c23b48cca29b0d891c84fc5d76dd1c86.jpg


Sent from my SM-N920V using Tapatalk
 
Trying to find fittings and components to make a blind that will work in those tracks is likely going to be expensive. Why not just use canopy hardware ? Easy put up and take down.... cheap... strong...

https://www.ysbw.com/Canopy-Fittings-1-Inch-s/7.htm

Drop down sides... dog ramps.... you could make whatever you can imagine out of that stuff and all you need is a conduit cutter.
 
https://forum.tinboats.net/viewtopic.php?f=3&t=40339&hilit=extrusion

On our smaller boats, we just haphazardly tossed/placed burlap bags around the boat, which was painted a marsh tan.
 
Thanks for the thoughts. My initial thoughts were a conduit scissor blind until I saw the grooves on caps

Sent from my SM-N920V using Tapatalk
 
I have a Cabelas Northern Flight blind. I added belly bars on both sides made thin wall electrical conduit to give more room inside.
 

Latest posts

Top