TinBoats.net
The original aluminum boat site!
Aluminum floor Guage
- Thread starter elrodphil
- Start date
Help Support TinBoats.net:
Phil - you need to describe the mounting system you intend to use.
what will be supporting the deck metal ?
photos are always of great help
what will be supporting the deck metal ?
photos are always of great help
mbweimar
Well-known member
I used .090 for the floor in my 1752 Weldbilt. I probably should have gone with .125, but I wanted to save some weight.
user 21876
Well-known member
- Joined
- Dec 25, 2016
- Messages
- 118
- Reaction score
- 0
There is roughly a 7oz difference per sq ft between .9" and .125" for future reference. You would have noticed a big difference in .9" and .125" also in terms of the amount of give. I put the 1/8" floor in mine after comparing the 2 and there is no give between the runners.
mbweimar
Well-known member
Well shoot... That's only a 14lb difference in a 4x8 sheet. Oh well.
