floor joists

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

water bouy

Well-known member
Joined
Jun 29, 2016
Messages
686
Reaction score
7
Location
middle of NC
Wonder if anyone has had a sheet metal shop bend factory-like floor joists for their v hull. A local guy has some 18 gauge aluminum priced very reasonably. Pics of remodels seem to show two running the length of the floor but I'm thinking about three. They appear to be Z shaped.
 
Several of mine were snapped in half so I grinded them down and welded Aluminum stock that was about half inch wide by quarter inch thick all the way along the top and then grinded the edges off so after it was painted it would look close to factory. I'm not sure if that's the same problem you have or not but that's how I fixed it.
afc9fbb544206be265e01ed9a8813321.jpg
5690e9a09ad1269a2efc6c77db36cd13.jpg


Sent from my SM-N900V using Tapatalk
 

Latest posts

Top