1472 transom reinforement

Fiberglass Supply Depot
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Prowelder

Prowelder

Well-known member
Joined
Jan 5, 2016
Messages
426
Reaction score
5
Just a little side job for a buddy. I reinforced the transom and did some bracing for the decks.
20b099951ba56e67d4e846ab6adb047d.jpg
3415cf0582267f9c13ebd5e13311b958.jpg
37b018b127315e96033009aadfdef587.jpg
a993dd7b92f0be801ea017e336f0acf8.jpg
e005e0318325dee5b9faa2777e6a9304.jpg
6711103a536ee7d83ecd988f1edffaa6.jpg
ca446b206243cd2f9b3236470bb4a859.jpg
a20a86667459c4d80f1d2bd0a799f95f.jpg
fd60749a20b25e2129f8501d8afd0ec3.jpg
82a5cd2cd2bee741d6b41634496fa207.jpg
5d8914582bdcaa521ea4ca1696042ae6.jpg


Sent from my SM-G955U using Tapatalk
 
Awsome, so what motor is he going with. Was that the reason on the transom work. Looks like it could handle a 40 or more.


Sent from my iPad using Tapatalk
 
CedarRiverScooter said:
Nice welds!

Are you going to add a console?
Click to expand...
This is not my build, but I think he's using a tiller steer. I just reinforced the transom.

Sent from my SM-G955U using Tapatalk
 
gatorglenn said:
Awsome, so what motor is he going with. Was that the reason on the transom work. Looks like it could handle a 40 or more.


Sent from my iPad using Tapatalk
Click to expand...
I think he has a 20 or 15, but the transom was weak and welds were cracking because it's a double wide. 1472

Sent from my SM-G955U using Tapatalk
 

Similar threads

8
Old Meyers transom repair questions
Replies
16
Views
424
LDUBS
LDUBS
B
Alumacraft Model E Missing OE Knee Brace
Replies
4
Views
181
LaqueRatt
LaqueRatt
B
New Owner of an Alumacraft 1954 Model E
Replies
1
Views
83
LDUBS
LDUBS
Satchamo
Pitted transom
Replies
5
Views
772
Sea Antsy
Sea Antsy
S
Best way to brace middle of a shallow V hull 14ft-
Replies
4
Views
1K
SpaaaaaceCowboy
S

Latest posts

Top