Floor Removal Alumacraft Lunker 16SS

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BLindahl

Member
Joined
Dec 16, 2018
Messages
13
Reaction score
1
Location
Elk Grove Village, Illinois
Okay, got most of floor out of this thing except for under side compartments. As I work my way to the back of boat wood gets worse. Was thinking of using a sawzall to cut under them and getting out as much as I can. Do all these have to be removed or can new floor be squeezed underneath?
 

Attachments

  • A5EF6924-AFA4-4948-8DC3-352257BC64B3.jpeg
    A5EF6924-AFA4-4948-8DC3-352257BC64B3.jpeg
    98.7 KB · Views: 698
In my experience, attempts to work in confined areas are a big PIA & I would have been time-ahead to just remove the obstacle.

Are the rivets holding the side boxes all above waterline? If so, you could just drill them out & replace later without much consternation.
 
Top