Small hole repair

Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
K

killdee

Member
Joined
Feb 18, 2017
Messages
9
Reaction score
0
Location
Marietta Georgia
I found a small hole about like a 6 penny nail near the back of my boat on a raised rib. It’s not accessible from the top it’s under a portion that’s covered behind the bench. I thought about putting a rivit in it and j b weld under the rivit before I install. Any ideas on a better repair? I’m about to sell the boat and want to make a proper repair.

Thanks killdee
 
There is your answer....3M5200 is the boater's friend and has been for many, many years. Expensive, but worth it.

"A closed end pop rivet bedded in a little 3M5200 should do." lickemstickem
 

Similar threads

sunnyg
Got my first boat! Could use advice on corrosion repairs.
Replies
9
Views
2K
michaelaskew
michaelaskew
T
Valco Jon Boat seam repair.
Replies
11
Views
1K
DaleH
DaleH
Tin Man
Drilling 3/4" hole in side of boat....Tips/Advice
2
Replies
30
Views
3K
airshot
airshot
Tin Man
Bow Deck Rubbing on hull - slight detent created
2
Replies
23
Views
2K
Tin Man
Tin Man
F
Large lot of 70's and 80's Johnson and Evinrude outboards
2
Replies
27
Views
2K
captain cletis
C

Latest posts

Top