Dennis1022
Well-known member
:?: I have bought this boat last week, with tilt trailer 25 HP Evenrude and 35# Minn Kota transome mount. I had already removed the old torn carpet. Then I had taken off the 3 wooden benches which were rotten. The trailer had to have the wires replaced and the tail lights. I have the problem of where do I begin from here! I like to have a pedestal seats but not to high. Also like to put in storage space and light and other things. The one problem I found is that the boat bed don't show ribs only on the bow! The floor is one long sheet of metal with rivets all around the floor. I'm not sure if the floor rivets are popped into the bottom of the boat. The bottom of the boat and sides are painted with a think coat looks like oil paint and the color is Black. My question, is has anyone work on this brand and size before?I haven't seen anyone else restore or convert this type of boat! Any information would be greatly appriciated. What I like to do is have 2 trolling motors minn kota's 55lb thrust and 33lb thrust, and 2 hummingbird Piranha max 15 and humminbird piranha max 220. I like to put the switch system with toggles in front and rear. One other thing is I'm going to put in the gas can area is a vent so gases won't build up! What do you all think of this. I will also have 3 seats 2 of them will be pedestal.
Thank You in advance Dennis
Thank You in advance Dennis