Deck support framing

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Guy

Active member
Joined
Nov 27, 2008
Messages
39
Reaction score
0
Thought I would pass on some photos of my progress on my 1436 Tracker Boat. I did my framing a little different. Looking at the photos you will see I have 3 alluminum angle irons on the front bow. It is probably massive overkill but I wanted to make sure that the angle iron would handle the weight without any center supports. As you can see the aft angle iron is supported by 3 angle irons. bottom two, one on top of the other, supports the 2x4s and the one on top is for the decking. Let me know what you think. The reason I don't want any supports from the ribs to the 2x4s is I want to leave this space all open for storage.

Guy

https://s391.photobucket.com/albums/oo352/glandry0/
 

Latest posts

Top