Recently did a compression test on my 35hp johnson. Both cylinder are about 140 psi. So once the gauge stops at 140 it slowly drops back down. Roughly about 20psi the first 5 seconds after topping out at 140. Is that normal or is it something I should be worry about?
TinBoats.net
The original aluminum boat site!
Question about compression test.
- Thread starter sawtee
- Start date
Help Support TinBoats.net:
- Joined
- May 15, 2010
- Messages
- 3,667
- Reaction score
- 325
- Location
- Central Florida
- LOCATION
- Lake County, Central Florida
Nothing to worry about.
