03 Yama 4S 25HP

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

skipper123

Well-known member
Joined
May 24, 2011
Messages
110
Reaction score
0
Location
Clarks Hill SC
I have been working on the motor replacing all the fuel lines gas tank primer bulb and removed the carb and cleaned with carb cleaner and compressed air five times to get it to run WOT. It will now start and idle great but when the throttle is applied it has a bad stumble before winding up to WOT. I have to rock the throttle a few times. Do any of you guys know what part of the carb to look at for this problem. My prime start is broke but it starts and idles fine now that the weather is warm. Once it hits WOT it will run all day. It will also idle all day.
 
After removing and cleaning five times found a small grain of trash in one port with a magnifying glass. Fixed and running great.
 

Latest posts

Top