Guess the prop pitch?

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Cubman

Well-known member
Joined
Apr 20, 2008
Messages
168
Reaction score
0
Location
Oak Ridge, TN
This prop is off a 1992 Johnson 60hp. There are no markings on the prop. I would like to know the prop pitch to give the prop shop a baseline when I go to get a new prop.

The diameter looks to be 12 3/4", I took this picture hoping someone may be able to tell. I know its a long shot but your help may save me from having to buy more than one prop.

Thanks

DSC03083.jpg
 
Boat is a riveted Lowe 1648 mod-v with 20" transom. Motor is a 1992 3cyl Johnson 60hp tiller, the lower unit ratio looks to be 2.33:1 as best I can tell. Normal load is two guys, two deep cycle batteries and six gallons of gas (600-650 pounds). I am saving up for a jack plate right now, I don't know if that will impact the pitch I need.

Thanks for the help.
 

Latest posts

Top