cut-off switch lanyard for 1989 Mercury 9.9

Fiberglass Supply Depot
Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

dkuster

Well-known member
Joined
Jul 15, 2011
Messages
84
Reaction score
0
I bought this motor used a few months ago, and the cut-off switch lanyard is missing.

Does anyone know the part number, or have a link to where I can buy a replacement?

Thanks!

-dan
 
I did look at their website, and they had several lanyards for mercury outboards.

But none of them were for the 9.9hp two stroke... :cry:




crazymanme2 said:
If yours has the (toggle switch) type kill any West Marine will have them.
Click to expand...
 
I had the same problem a few months ago. Turns out they make a universal lanyard. You should be able to find one pretty easily. Hope this helps
 
Hmm, this might be the one:

https://www.westmarine.com/buy/products/6598-replacement-lanyard-cord-6-8-15hp.html

That is, if the description means 6.8 to 15 hp.

Otherwise, I'll go for a universal lanyard...
 
Actually, this set of keys on a lanyard says it will work with _all_ outboard motors, and it's dirt cheap:

https://www.amazon.com/Kwik-Tek-BKS-6-Switch-Lanyard/dp/B000KK93IA/ref=cm_cr_pr_product_top

I ordered one.


dkuster said:
Hmm, this might be the one:

https://www.westmarine.com/buy/products/6598-replacement-lanyard-cord-6-8-15hp.html

That is, if the description means 6.8 to 15 hp.

Otherwise, I'll go for a universal lanyard...
Click to expand...
 

Similar threads

A
Looking for a replacement stop - kill switch
Replies
8
Views
680
AZGDOGG
A
H
Weekend auction lot of outboards
Replies
5
Views
692
hoarder
H
N
Mariner 40C Not turning off
Replies
0
Views
324
nelsonag
N
F
Large lot of 70's and 80's Johnson and Evinrude outboards
2
Replies
27
Views
2K
captain cletis
C
R
Need help finding part numbers for my 9.9/15 tiller????
Replies
11
Views
983
RaisedByWolves
RaisedByWolves

Latest posts

Top