Mercury 9.9 max rpm

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

1448

New member
Joined
Aug 30, 2015
Messages
3
Reaction score
0
I have a 2006 9.9 4 stroke merc on my grizzly 1448 sc. I changed from a 8.5 pitch prop to a 6.5, rpms went from 4300 to 5300 WOT for 8mph gps. I was happy with that, being that I am now within the 5 to 6 thousand rpm rating for this motor. Now, the 5300 is with my buddy and me plus 2 batteries and gear. By myself, rpms go to 6030 WOT for 14 mph gps. Will this hurt my motor to keep WOT for only 30 rpms over, or should I back off throttle some, or just add another battery, ect. ? Thanks
 
Depends on which way you fish the most, solo or with your buddy. 30 rpm is nothing to be concerned about, just back off the throttle a bit.
 
Sorry, I'm just confused why it goes faster. Wouldn't it move more water if you went from an 8 to a 10 pitch?

Or is there not enough horsepower, and getting up in the higher RPMs gives you more of that?
 

Latest posts

Top