Hi
I finally get my new floor installed into my boat and I thought I would take it out for a test when I noticed that the steering does not work.
Meaning I can't turn the wheel to turn the boat. And this was working a few weeks ago.
I did some troubleshooting.
I unscrewed the steering cable from the motor (picture 111555), now when I turn the steering wheel I can see cable moving in and out of the steering cable sleeve.
Then on the other side of the nut I unhooked the connection (top left) between the motor and the remote steering (111613). The boat tilts left and right fine.
It seems the issue is the piston in the bottom right of 11613 is not moving.
It seems that looking at picture 113504 the remote steering cable enters from the left and is supposed to move the piston on the right in and out which is supposed to move the motor.
Any feedback is appreciated.
Alex
I finally get my new floor installed into my boat and I thought I would take it out for a test when I noticed that the steering does not work.
Meaning I can't turn the wheel to turn the boat. And this was working a few weeks ago.
I did some troubleshooting.
I unscrewed the steering cable from the motor (picture 111555), now when I turn the steering wheel I can see cable moving in and out of the steering cable sleeve.
Then on the other side of the nut I unhooked the connection (top left) between the motor and the remote steering (111613). The boat tilts left and right fine.
It seems the issue is the piston in the bottom right of 11613 is not moving.
It seems that looking at picture 113504 the remote steering cable enters from the left and is supposed to move the piston on the right in and out which is supposed to move the motor.
Any feedback is appreciated.
Alex