Wellmax LED trailer lights

Trailer related issues and discussion goes here.
Post Reply
the hammer
Posts: 134
Joined: 08 Mar 2007, 15:39
Location: Taylors, SC

Wellmax LED trailer lights

Post by the hammer » 13 Apr 2019, 13:20

I can't figure out how to attach the lights to the trailer. I went as far as opening one of the lights to see if there is a threaded hole in the back ... nothing.
Any help would be appreciated.
Thanks

Xtremeboats
Justaguy442
Posts: 33
Joined: 08 Feb 2019, 16:43

Wellmax LED trailer lights

Post by Justaguy442 » 13 Apr 2019, 13:34

if there is 2 bolts on the back, thats were the bracket goes for the square lights. If they are the rectangle light the bolt head fits up into slots in the back.

the hammer
Posts: 134
Joined: 08 Mar 2007, 15:39
Location: Taylors, SC

Wellmax LED trailer lights

Post by the hammer » 13 Apr 2019, 14:25

Justaguy442 wrote:if there is 2 bolts on the back, thats were the bracket goes for the square lights. If they are the rectangle light the bolt head fits up into slots in the back.
Just checked. That's not it. I'll take a pic and post it.
Thanks.

the hammer
Posts: 134
Joined: 08 Mar 2007, 15:39
Location: Taylors, SC

Wellmax LED trailer lights

Post by the hammer » 13 Apr 2019, 15:59

Back of light -- trailer light area front and back
Attachments
IMG_0818.JPG
IMG_0817.JPG
IMG_0816 2.JPG

the hammer
Posts: 134
Joined: 08 Mar 2007, 15:39
Location: Taylors, SC

Wellmax LED trailer lights

Post by the hammer » 13 Apr 2019, 17:01

3 hours later, figured it out in 2 seconds.

Justaguy442
Posts: 33
Joined: 08 Feb 2019, 16:43

Wellmax LED trailer lights

Post by Justaguy442 » 13 Apr 2019, 23:13

Yes those slots. I should have posted a pic for you, but was just leaving the house. Could have saved you 3 hours.

the hammer
Posts: 134
Joined: 08 Mar 2007, 15:39
Location: Taylors, SC

Wellmax LED trailer lights

Post by the hammer » 14 Apr 2019, 07:11

Justaguy442 wrote:Yes those slots. I should have posted a pic for you, but was just leaving the house. Could have saved you 3 hours.
Thanks but that's not your burden. It woulda been nice had Wellmax provided better instructions. For future reference, you slide the head of the bolt into the slot, then slide the bolt through the openings. I have it reversed.

Post Reply