G3 1860 CCJ side panel removal

User avatar
kthmarks
Posts: 15
Joined: 05 Mar 2010, 17:54
10
Location: Alpharetta, GA 30004

G3 1860 CCJ side panel removal

Post by kthmarks »

I thought I'd share with you (for the guys who have one), what's beneath the side panel after you drill out +/- 60 pop rivets. I installed a Minn Kota 110 charger for my starter battery under the console and ran the wires to the stern this way. I have some sheet metal experience so the drilling of the heads of the rivets was no big deal and the rivet shafts were easily tapped out with an 1/8 (sometimes 3/16") drift.

Hope this is helpful to someone in the future should they need the info.
You do not have the required permissions to view the files attached to this post.

User avatar
richg99
Posts: 5063
Joined: 27 Nov 2010, 09:36
9
Location: Houston, TX & Crossville, TN

G3 1860 CCJ side panel removal

Post by richg99 »

That is good of you to post that information for the next guy.


t
Thanks
DO YOUR PART, STAY APART!