G3 1860 CCJ side panel removal

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

kthmarks

Member
Joined
Mar 5, 2010
Messages
15
Reaction score
0
Location
Alpharetta, GA 30004
I thought I'd share with you (for the guys who have one), what's beneath the side panel after you drill out +/- 60 pop rivets. I installed a Minn Kota 110 charger for my starter battery under the console and ran the wires to the stern this way. I have some sheet metal experience so the drilling of the heads of the rivets was no big deal and the rivet shafts were easily tapped out with an 1/8 (sometimes 3/16") drift.

Hope this is helpful to someone in the future should they need the info.
 

Attachments

  • IMG_3092.JPG
    IMG_3092.JPG
    58.5 KB · Views: 1,935
  • IMG_3093.JPG
    IMG_3093.JPG
    43.9 KB · Views: 1,935

Latest posts

Top