hamar507
Well-known member
Took my tinboat out today and noticed alot of fuel/oil smoke coming out of my 6 hp Evinrude. It is an older motor and has recenly all been re-done. My question is with a 50 to 1 fuel mixture is that too much? Could it be reduced to say 45 or 40 to 1 and not affect the motor. I use a Yamalube 2 stroke oli recommended by the mechanic and the fuel was fresh.
I have messed with the lean/rich knob and the motor runs great, is this something that is common in the older Evinrudes. The motor is a 1976. Thanks
I have messed with the lean/rich knob and the motor runs great, is this something that is common in the older Evinrudes. The motor is a 1976. Thanks