Outboard jet install questions

Fish On Fabrications
TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
F

Flownorth

New member
Joined
Jul 11, 2016
Messages
4
Reaction score
0
I would like to start off by saying I have always had tiller steer. I just recently put a new floor and center console in my 1652 weldbilt. My console is only 18" wide, what type of steering or steering kit would you guys recommend? I am putting a 2000 model 60/40 jet remote steer on the boat. I have nothing but the motor and the boat sitting ready.
Thanks
 

Attachments

  • 20160819_125705.jpg
    20160819_125705.jpg
    27.8 KB · Views: 1,718
  • 20160822_140337.jpg
    20160822_140337.jpg
    50.3 KB · Views: 1,718
  • 20160822_140347.jpg
    20160822_140347.jpg
    17.7 KB · Views: 1,718
Standard steering you don't need hydraulic or nothing like that. Whatever steering that motor would come with for prop will work
 
You should be able to use the Teleflex Safe-T quick connect setup. I have a 19" wide console and there is room to run it down and out the side. You just need to measure the length for the cable.
 
amk said:
Standard steering you don't need hydraulic or nothing like that. Whatever steering that motor would come with for prop will work
Click to expand...

Amk, I've sent you a PM.
 
Thanks guys,

Ok NFB Rotary or normal rotary steering? 2014 Mercury 60/40 jet.

Thanks
 

Similar threads

MidMissouriFishing
What size jet motor on 1648 to be legal?
Replies
8
Views
1K
MidMissouriFishing
MidMissouriFishing
thill
Frozen or Stiff Steering? How to clean an outboard steering tube
Replies
11
Views
747
timm gage
timm gage
R
Optimal jet boat for the fishing I want to do
2
Replies
32
Views
4K
FuzzyGrub
FuzzyGrub
N
Balancing a 12ft Jon Boat well with oversized Outboard motor (20hp)
2
Replies
39
Views
4K
canadian omc
C
D
Suzuki 115 and 140 pump questions
Replies
0
Views
423
Dthree
D

Latest posts

Top