Jet john

SC Designs
Posts: 92
Joined: 13 Oct 2015, 14:13
4

Jet john

Post by SC Designs »

Yo Paintman, check out my latest build I just posted. I seal everything with 3M 5200 and stainless screws then come back over it with fiberglass and bondo for smoothing.

CedarRiverScooter
Posts: 1101
Joined: 13 Nov 2014, 08:01
5

Jet john

Post by CedarRiverScooter »

I also used fiberglass filler for smoothing. I recommend epoxy resin for the fiberglass filler. Polyester can absorb water & has less adhesion to boot.

User avatar
stinkfoot
Posts: 399
Joined: 05 Feb 2016, 03:42
4
Location: Langley, BC

Jet john

Post by stinkfoot »

What happens when you nail a rock with the Bondo?

SC Designs
Posts: 92
Joined: 13 Oct 2015, 14:13
4

Jet john

Post by SC Designs »

The bondo is very small amounts, basically when the glass is laid it still creates and uneven surface so after sanding you still have high and low spots, that's where the bondo comes in. Its not large amounts to fill up huge holes. It's a given if a person smacks a huge rock, no matter whats under there on the hull, it stands the possibility of doing damage. I personally try to stay away from the rocks...lol.

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

Little work done
Attachments
20170211_195919.jpg

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

More progress
Attachments
20170212_154401.jpg

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

Some more pics
Attachments
20170211_185807.jpg
20170212_135419.jpg
20170212_154826.jpg

SC Designs
Posts: 92
Joined: 13 Oct 2015, 14:13
4

Jet john

Post by SC Designs »

Looking Good !!! =D>

CedarRiverScooter
Posts: 1101
Joined: 13 Nov 2014, 08:01
5

Jet john

Post by CedarRiverScooter »

Great job!

Transition panel should work good to avoid cavitation.

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

Jet fitted
Attachments
20170220_233207.jpg

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

Little work
Attachments
20170222_182437.jpg
20170222_180626.jpg

User avatar
flex
Posts: 59
Joined: 08 Feb 2017, 09:20
3

Jet john

Post by flex »

Hey buddy! Haha. I also joined to post my build!

Sent from my HTC One M9 using Tapatalk

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

Awesome,what r u building

User avatar
handyandy
Posts: 559
Joined: 02 Jun 2015, 09:56
4
Location: Bedford Indiana

Jet john

Post by handyandy »

So are the pump housings on those jet skis composite with a metal wear sleeve in them?

Paintman
Posts: 57
Joined: 30 Jan 2017, 12:21
3

Jet john

Post by Paintman »

No all composite,the jet is aluminum

Post Reply