What am I ?? do you know ???

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Billinthedesert said:
Well, rats. Stuck behind pontoons until spring ...

:cry: Yeah that's what I thought when I saw it... :---) well... not really that nice when I saw it waaay in the back buried behind all those pontoons !! hopefully I won't have to work this weekend and I can make one more visit and get her tarped up well for the long cold winter hibernation ahead.. get a few more photos of her all covered up and in a sea or pontoons... probably never covered up before.. or at least for the last 26 years !! gotta show her some love.. she has waited a long time for some attention.. its a start... so a few more months will have to pass by to give her more... at least after 26 years she finally got out of the woods and actually moved.. if only for a short distance... :wink: come spring she will start her facelift !! bring back some shine!! give her some new wood !! fix her windows, and make her feel young and proud again !! =D> till then this thread will probably get buried and forgotten.. but will defiantly be resurrected in the spring !! its already brought 9 pages of interest in a short time !! thanks to all who have looked at it and responded to it .. =D>
 
Weldorthemagnificent said:
I predict this thread will be one of the most followed builds on the site!


Sent from my iPhone using Tapatalk

I would be proud it is was !! hopefully I can get a few more photos to share of putting it away for the winter this weekend !! Thanks again to all !! TinBoats is a great site!!
 
With an engine mounted on the boat, is there any tongue weight? as long as you have some good tongue weight then I guess it is ok but it looks like the wheels are too far forward to me. Without tongue weight the trailer will fishtail.
 
surfman said:
With an engine mounted on the boat, is there any tongue weight? as long as you have some good tongue weight then I guess it is ok but it looks like the wheels are too far forward to me. Without tongue weight the trailer will fishtail.

well its to heavy to pick up the tongue by hand.. but a little easer "but still not easy" to hold up once its at waist level or above... I still plan to use the trailer I bought for it though.... just thought that if its the original trailer a may keep it and restore it as well...
 
here are the last photos for awhile... its put to bed and barely peeking out among the pontoons .... it became very windy the day I tarped it and became quite the challenge.. I also brought home my 60 hp. Mercury Mark 75 (the first tower of power) motor.. no photos just yet, still in my truck... and 3 of my windows will be mailed out tomorrow from New York... 1 still in the search... but I'm 3/4s of the way finished on that problem !!
 

Attachments

  • 20180921_160334[1].jpg
    20180921_160334[1].jpg
    114.2 KB · Views: 1,674
  • 20180921_160428[1].jpg
    20180921_160428[1].jpg
    80.5 KB · Views: 1,674
  • 20180921_160625[1].jpg
    20180921_160625[1].jpg
    53.8 KB · Views: 1,674
surfman said:
What are those brackets mounted on the transom for?
I really don't know.. someone else on here said they believe they were used as downriggers.. I plan to take them off.. Here are a few photos of my 60 hp.1958 Mercury Mark 75 … the guy said, that the guy he was selling it for, has friends that race boats, and although he doesn't race, he likes to go fast.. and the power head is ported and polished...
 

Attachments

  • 1958Mark75-2.jpg
    1958Mark75-2.jpg
    38.4 KB · Views: 1,639
  • 1958Mark75-3.jpg
    1958Mark75-3.jpg
    39 KB · Views: 1,639
  • 1958Mark75-1.jpg
    1958Mark75-1.jpg
    36.5 KB · Views: 1,639
I’ve always been a johnnyrude guy but I gotta give the style points to mercury. That looks sweet!


Sent from my iPhone using Tapatalk
 
The tower of power for sure, nice.

Too bad the forum doesn't have a like button so we don't need to make a post just to say Nice.
 
:popcorn:

It's a beauty... with that much weight hanging off the back end you really should consider ditching the classic trailer however. Sometimes the old ways aren't the best way.... there was a lot of learning involved over those decades when it comes to trailering. Early trailers were simply junk when compared to modern. Just like the Tee Nee trailer with those little nylon keel rollers.... The peace of mind you'd get from a well supported modern trailer will be worth that small loss in "authenticity" IMO.
 
surfman said:
The tower of power for sure, nice.

Too bad the forum doesn't have a like button so we don't need to make a post just to say Nice.

thanks surfman !! yes I know some other forms I visit do have like buttons... but I guess this way my thread doesn't get buried real deep !! lol this Mercury Mark 75 is the first 6cyl. outboard very made !! they ran a 50,000 mile marathon with two of them that lasted 68 days to prove their reliability which has never been beaten today or even tried again with modern motors !!
 
Shaugh said:
:popcorn:

It's a beauty... with that much weight hanging off the back end you really should consider ditching the classic trailer however. Sometimes the old ways aren't the best way.... there was a lot of learning involved over those decades when it comes to trailering. Early trailers were simply junk when compared to modern. Just like the Tee Nee trailer with those little nylon keel rollers.... The peace of mind you'd get from a well supported modern trailer will be worth that small loss in "authenticity" IMO.

Thanks Shaugh, this motor really isn't as heavy as it may look.. its 178lbs.. but I will be using my more modern EZ loader trailer that I converted to bunks for this boat.. the bunks will end just past the transom for best support... just keeping the old trailer because it came with it.. if I ever put it on it again it will never have a motor on the boat..
 
not much more to add at this time just snow blowing some snow today.. hope to go pick up my Mercury Mark 55 and this first generation cast iron motor stand in the next few weeks.. won't be able to pick up my Mark 75 till spring...
 

Attachments

  • s-l1600[1] (13).jpg
    s-l1600[1] (13).jpg
    31.7 KB · Views: 1,506
  • s-l1600[2] (7).jpg
    s-l1600[2] (7).jpg
    32.5 KB · Views: 1,506
  • 00404_bT3mDHSkvbl_1200x900[1].jpg
    00404_bT3mDHSkvbl_1200x900[1].jpg
    32.5 KB · Views: 1,506
  • 00Q0Q_3C4UnG0Cx9D_1200x900[1].jpg
    00Q0Q_3C4UnG0Cx9D_1200x900[1].jpg
    26.9 KB · Views: 1,506
  • 00E0E_e08C2fKLhTg_1200x900[1].jpg
    00E0E_e08C2fKLhTg_1200x900[1].jpg
    20.8 KB · Views: 1,506
  • 00000_a1YUi3Ed4iK_1200x900[1].jpg
    00000_a1YUi3Ed4iK_1200x900[1].jpg
    32.2 KB · Views: 1,506
Weldorthemagnificent said:
I have no earthly idea but I’d hate to be in it if it starts hailing. It would be deafening!


Sent from my iPhone using Tapatalk

[emoji23][emoji23][emoji23][emoji23][emoji23]
 
well nothing new to add about my boat... its still hibernating … but I did just pick up these awesome old life preservers !! they are from about the same era... they are balsa wood and in mint condition.. I think they will display nicely with the boat once its restored !! hope you like them as much as I do !!
 

Attachments

  • 00M0M_bdYFn2SRl05_600x450[1].jpg
    00M0M_bdYFn2SRl05_600x450[1].jpg
    30 KB · Views: 1,280
  • 00T0T_bX3DzqpjQKR_600x450[1].jpg
    00T0T_bX3DzqpjQKR_600x450[1].jpg
    36.5 KB · Views: 1,280
  • 00R0R_cZZ3CjG7QpX_600x450[1].jpg
    00R0R_cZZ3CjG7QpX_600x450[1].jpg
    29.7 KB · Views: 1,280
  • 00c0c_7iLJin16Jee_600x450[1].jpg
    00c0c_7iLJin16Jee_600x450[1].jpg
    30.2 KB · Views: 1,280
  • 00a0a_5Ur2KeUj72x_600x450[1].jpg
    00a0a_5Ur2KeUj72x_600x450[1].jpg
    9.5 KB · Views: 1,280
Well I'm getting started on my project again.. I'm going to do some changes to my trailer again before transferring the boat to this trailer.. I have already changed most of the rollers to bunks.. now I want to alter more on the trailer.. A tree somewhat fell across it during a wind storm this winter and broke one of the bunks.. so I'm going to change them out and add caliber bunk wrap instead of the carpet.. the boat weighs about 700 lbs. empty .. my question is would you use 2X6 or 2X4s for support ?? right now I had two of each but I'm not sure what would be best for the boat.. all 2X4s all 2X6s or 2 of each ?? thanks !!
 

Attachments

  • DSC00905.JPG
    DSC00905.JPG
    105.7 KB · Views: 1,200
  • DSC00888.JPG
    DSC00888.JPG
    50.2 KB · Views: 1,200
Well, all other things being equal, it seems the wider the bunk the more surface contact will be spread out, meaning the weight will be carried over a larger area. Seems like that should be a good thing.
 
I used 2x4's for my 16' Naden. Took a bit of finagling to get them all set good to the hull but the boat sits snug as a baby in a car seat. No carpet for this fishing boat, just used some leftover deck stain. Maybe carpet one day....
33556d0b03d7dbf6b77c2842828bd76e.jpg


Sent from my CLT-L04 using Tapatalk
 

Latest posts

Top