Search results

looking into getting a 1652d. was just looking for some feedback on them. how they're holding up. i love the fact they have a 77" beam

I finally talked my wife into letting me get a new boat. i am looking at buying the motor first. I am looking at 40hp. maybe making the leap to a 50hp. i am wanting to buy the motor brand new then save for either a used hull or save up for a new one. but i figure th motor is the most important...

Dont want to keep draggin my 12ft boat so i am looking at ideas for a dolly. Thanks in advance

Day 1 Day 2

I have an 03 25hp tiller. My primer bulb will not stay tight and if i pump it a few times gas comes out of the prop. The motor was recently laid on its side. So im thinking something is stuck open. Any help is appreciated

Looking at buying a 2003 merc 25 with ss prop for 1700. Short shaft manual start but overall a good clean motor.

Im replacing my charge coil and timerbase. Well i checked the wiring before removing the pins for the charge coil and they were color coded. Got my wires ran and then jumped the gun and pulled my wires for the timerbase before checking..... So now i have two empty holes and dont know which pin...

Heard good and bad about their services. Seems those with good stories are suoer pleased and those with bad stories are really upset. Fixen to order my parts from them so hopefully it goes well

Well i think i might possibly sort of kinda maybe have the wife talked into letting me buy a new motor. Looking at a 25-40hp tiller. My dad swears by evinrude and johnson. As far back as i remember we've only had two,motors. A 25hp evinrude and then a 25hp johnson we've had for the past 10-12...

Was running my boat last month and everything was going good. Was running wot and it just died. No spitting or sputtering just quit like i hit the kill switch. Then nothing..... Couldnt get it to fire. Got it home and tinkered with it a while got it to run for a minute so took it to run it. Made...

i just bought a sternlight for.my boat and im gonna see if i can find an led light to swap out the "906" bulb. im gonna do some night fishing and only have one battery so im gonna try to rig up something with an led flashlight hopefully. aanybody ever done something similar? ive seen a few wuth...

Well let me start by saying im used to a 5-6ft castnet. Being about 5'7" I felt kinda intimidated with a bigger net. After multiple trips though I just felt like I was wasting my time with my 5ft net. Well fate came calling and a few days ago I got my net stuck and it was done for. Well I had...

Theyre not finishe, I have to wait till Thursday before I can get the pvc and my new lights. These were really simple to make.strangth was not really an issue as I use my side boards for guides I just made these for when im backing IP and to quit dunking my lights. I just used some angle iron...

Pleasr make sure things are bolted down! I know us tinboaters have tons of mods done to our boats.well ive been in the middle of carpeting my back deck for a while.well I only had onr piece left but ive been putting it off. Well I never bolted the front back down, and seeing as how it weighs...

Well my boat was a side console but I wanted an open floor so I made it a tiller. Only problem was my back deck is 48" which makes driving an adventure and a challenge. It had three livewells, two small ones which I use one for tools and the other for drinks. Well the big one was too small for...

Right now I have a 1995 Fisher 1650mv and I have a deep cycle group 27-29 cant remember exactly pretty close to the transom and my gas tank only about two gallons in it about a foot amd a half from the back of the boat.and me about 150lbs and im drafting about 6-7", thats also with a small two...

Im just lookin for a few measurements. I have a 1650 and am converting it to center console.

I have a 1995 Fisher 1648 possibly 1650 all welded boat. It has live Wells and a 20" transom I cut down to 17" for my short shaft. The previous owner had a side console I took out for more room. If I keep it I wanna cut the livewellscout and cut the rear deck 14" back so I have easier access to...

Not sure if there is one on here or not. I have been researching painting my boat amd apparently alot of other people have too...its basically the same questions, what kimd of primer, what kind of paint, etc... they all have good information but lack pictures. I think we should start a thread...