1986 Evinrude 40 Tiller, How to wire fuel primer solenoid

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
There should be a purple wire with a white tracer that goes to the primer. That is your power wire. For ground there should already be a black wire coming out of the primer and grounded by one of the two mount screws.
OMC never used a toggle switch so that was wired after the fact. Regardless, one side of a momentary on/off switch should have a fused power wire going to it and the other wire should be the purple/white Easy enough.
Wheredoes the purple wire connect
 

Latest posts

Top