B Bradh Member Joined Jun 24, 2020 Messages 14 Reaction score 0 Jun 27, 2020 #1 Putting a casting deck on my 1542. I’m wondering how close to center do I need my trolling motor. Not a ton of room to angle it and get it centered. Will it steer poorly if it’s not?
Putting a casting deck on my 1542. I’m wondering how close to center do I need my trolling motor. Not a ton of room to angle it and get it centered. Will it steer poorly if it’s not?
W Weldorthemagnificent Well-known member Joined Mar 12, 2017 Messages 1,232 Reaction score 56 Jun 28, 2020 #2 As long as the shaft is long enough to be lower than the hull it will work fine Sent from my CLT-L04 using Tapatalk
As long as the shaft is long enough to be lower than the hull it will work fine Sent from my CLT-L04 using Tapatalk
L lckstckn2smknbrls Well-known member Joined Oct 5, 2008 Messages 4,857 Reaction score 178 LOCATION Lake in the Hills Illinois Jun 29, 2020 #3 I'm no expert on this but I see plenty of TM mounted next to the gunnels.
B Bradh Member Joined Jun 24, 2020 Messages 14 Reaction score 0 Jun 29, 2020 #4 Glad to hear it. Thanks