Truckmechanic
Well-known member
I like it....How are you going to fasten in to the boat? Where did you get the plastic bolts holding it together?
TinBoats.net
The original aluminum boat site!
Bus Bar
- Thread starter Cheeseball
- Start date
Help Support TinBoats.net:
Cheeseball
Well-known member
Popeye: Yes, the wire is hammered into the pipe. I hadn't thought that far ahead about replacing it. I guess I would drill a hole in the end and bolt a new one on.
Truck: Look at the pic below. I'll mount the pos and neg busses approximately where the little white box is on the seat. The whole back open area will be covered with a deck that will be level with the top of the seat. The battery will be back there as well. I got the nylon bolts at a hardware store near where I live. But I'm sure you can find them at HD or Lowes.
Truck: Look at the pic below. I'll mount the pos and neg busses approximately where the little white box is on the seat. The whole back open area will be covered with a deck that will be level with the top of the seat. The battery will be back there as well. I got the nylon bolts at a hardware store near where I live. But I'm sure you can find them at HD or Lowes.
jasper60103
Well-known member
Cheeseball,
thanks for sharing. I'm adding electric start to my outboard and want to keep my
battery near the bow. Thanks again for the idea.
thanks for sharing. I'm adding electric start to my outboard and want to keep my
battery near the bow. Thanks again for the idea.
Cheeseball
Well-known member
jasper60103 said:
No problem my friend. Happy moding!
