crybrynt1975
Member
- Joined
- Jun 4, 2012
- Messages
- 11
- Reaction score
- 0
Hey guys, thanks for the help so far i took my 9.2 out for a test run this weekend started first pull everytime and it ran good but i have a few questions please......
It pushed my 14 ft v with 3 people at 5.8 mph which i thought was slow my 7.5 pushes the same at 7mph....
the tiller at one point must have skipped or reinstalled because nothing lines up for start, shift, etc not a big deal but i was wondering if its out of position and thats why i didnt get the mph. Heres a pic of the cam when the throttle is wide open. Also i was thinking maybe because its a 2 blade prop, which is well used......... Looks like i have a oil leak i will need to address dont know if its a gasket just needing to swell from sitting for a few years or????
any help or advice would be greatly appreciated
Corey
It pushed my 14 ft v with 3 people at 5.8 mph which i thought was slow my 7.5 pushes the same at 7mph....
the tiller at one point must have skipped or reinstalled because nothing lines up for start, shift, etc not a big deal but i was wondering if its out of position and thats why i didnt get the mph. Heres a pic of the cam when the throttle is wide open. Also i was thinking maybe because its a 2 blade prop, which is well used......... Looks like i have a oil leak i will need to address dont know if its a gasket just needing to swell from sitting for a few years or????
any help or advice would be greatly appreciated
Corey