tnriverluver
Well-known member
- Joined
- Jun 29, 2012
- Messages
- 314
- Reaction score
- 0
My new to me Alumicraft Angler has a small but deep dent in the bottom left corner of the transom like where someone backed into a rock. I found this this weekend after noticing water in the bilge after the boat had been sitting in the water for 6 hours. The crack is only about a quarter of an inch long in the center of the dent and this is in a very strong part of the transom being very near the corner so I doubt there is much flex there. What is the best semi permanent fix for this leak short of having it welded.