JamesM56alum
Well-known member
- Joined
- Jan 25, 2012
- Messages
- 814
- Reaction score
- 0
K so i was off today so i got decent amount done on the boat, put the liner on the floor midship up to the bow still needs one more coat so if you see thin spots that's why i also bolted down the front floor it's in for good now, then i made a new cap for the transom rail since it was split in the middle i had some 1/8 angle alum laying around i picked up from a buddy of mine came in handy i still have about 15 feet left im sure i'll find a use for it, anyways i also made a new board for the inner transom brace, turned out pretty good if you ask me i still need to trim off the edges an round them off but for now it's soaking in a coat of sealer. Like i said keep in mind the liner needs another coat, it looks half assed but it wont look like that for long lol
Onto the pics.
K onto the stuff that i'm actually good at, i hate working with wood i rule at working with metal, the marks on the alum is where it needs to be bent, torches an a dead blow hammer is your best friend when shaping.
Onto the pics.
K onto the stuff that i'm actually good at, i hate working with wood i rule at working with metal, the marks on the alum is where it needs to be bent, torches an a dead blow hammer is your best friend when shaping.