bassking920
New member
- Joined
- Jun 21, 2015
- Messages
- 1
- Reaction score
- 0
I modified my 14' Gamefisher and wanted to get some feed back and maybe some ideas on some small upgrades.
TinBoats.net
The original aluminum boat site!
My 14' gamefisher modification
- Thread starter bassking920
- Start date
Help Support TinBoats.net:
I modified my 14' Gamefisher and wanted to get some feed back and maybe some ideas on some small upgrades.derekdiruz1
Active member
- Joined
- Jan 7, 2015
- Messages
- 38
- Reaction score
- 0
I like this a lot actually. I pretty much wanted to do this exact same thing with my 12ft gamefisher, however I think i'm going in a slightly different direction for duck hunting from it. Overall great though.
Looks pretty good from what I can see! I amazed at the flooring and bulkheads some of you guys on here stuff into 12' & 14' rigs :shock: !
Maybe whereas I run in the salt, and want all usable power to the hull as I can, with the lowest center of gravity, I/we tend to add a minimal floor and that's it. Then again, there's no safe sea state for an elevated seat in the salt, at least above FAC (flat *** calm ...).
Do you tiller steer it from that elevated seat? What do you have for power? I'd also make sure you wear the ignition kill lanyard ...
Maybe whereas I run in the salt, and want all usable power to the hull as I can, with the lowest center of gravity, I/we tend to add a minimal floor and that's it. Then again, there's no safe sea state for an elevated seat in the salt, at least above FAC (flat *** calm ...).
Do you tiller steer it from that elevated seat? What do you have for power? I'd also make sure you wear the ignition kill lanyard ...
Similar threads
