InSaneFisherMan
Well-known member
- Joined
- Aug 11, 2020
- Messages
- 292
- Reaction score
- 116
Running engine after, yearly maintenance on my EFI Suzuki DF9.9.
Pushed key in, listen for solenoids, no sound, turn key and engine started and ran fine.
EFI’s don’t have carbs or chokes, so what does pushing in on key switch do?
Researched my manual and no mention of the push switch.
Remote schematic show it as a B.Z reset and goes to engine harness. Engine harness for my engine does not have a wire for this switch. Not used on my engine.
It appears to be a buzzer - check engine light reset on larger engines.
Pushed key in, listen for solenoids, no sound, turn key and engine started and ran fine.
EFI’s don’t have carbs or chokes, so what does pushing in on key switch do?
Researched my manual and no mention of the push switch.
Remote schematic show it as a B.Z reset and goes to engine harness. Engine harness for my engine does not have a wire for this switch. Not used on my engine.
It appears to be a buzzer - check engine light reset on larger engines.