YamahaC40Guy
Well-known member
- Joined
- Dec 1, 2008
- Messages
- 93
- Reaction score
- 0
Hey guys~I need some gasket material for the battery box I'm building. It will end up being the buffer between the box I'm building and the boat's floor/side. I've got the fit about 95% perfect, but want this in place to (hopefully) reduce/minimize buzzing and vibration when the motor is running. The ideal material would be on a roll, 3/8" wide, 1/8" thick, self-adhesive, UV-resistant etc. I'm machining the box with notches on the bottom to allow water to get out.
Anyone have any ideas? Something close? I've found nothing around these parts. Thanks so much for your help,
Rob
Anyone have any ideas? Something close? I've found nothing around these parts. Thanks so much for your help,
Rob