Tin Yachtsman
Well-known member
- Joined
- Jun 20, 2010
- Messages
- 82
- Reaction score
- 0
My outboard is a 1986 Johnson J60ELCD. One of the three carburetors has a damaged fuel nipple. It looks like the previous owner sheared it off at the carb body and tried to repair it with some sort of epoxy. As I was tinkering with the outboard, the entire repair job fell apart. I went looking for the piece in some online schematics and can't even find it in the diagram. Any ideas on where to look for a replacement or how to repair this correctly? The picture below is what the nipple looks like on the undamaged middle carb. It's near the top of the carb on the back towards the manifold.