NotAGuide
Member
I've been working on a little 13' Texas scooter jet tunnel project over the last year when time allows. Had to repair a few spots on the bottom along with welding up a bunch of previous owner garbage on the deck, etc. It's been slow going but recently making a little more progress. I like the rig enough that I've considered the option of a new 60/40. It most likely had a Nissan 60hp back when it was built in the late 80's but had a 50hp Yamaha prop when I purchased it 2yrs ago which I still have. The bottom of the boat is 62" wide and has 24" sponsons. I've test run the boat with a friends 50/35 Yamaha 2strk. It does push it ok with a load (23-24mph) but not overly impressive is why I'm considering a new motor. Mileage and noise is also a factor.
Both new Mercury and Yamaha's appear to be very similar in size and weight. Mercury lists it weight at 267 and Yamaha at 259. I believe the Mercury comes standard with a SS impeller vs. aluminum with the Yamaha. I didn't know if the actual pump size is the same for each or the performance is any different? Cost on the Mercury is a little less and we have probably one of best Mercury service dealers in the country close by. Yamahas speak for themselves on quality so not a problem there. Just hoping someone has a little experience with either before making a decision?
Here area few pics of the what I started with and current condition. Stripped the original center console tower and going with a grab bar and tiller. Also coated bottom with GatorGlide and currently working on the Tuff Coat for the deck.
Thanks for the help!
Both new Mercury and Yamaha's appear to be very similar in size and weight. Mercury lists it weight at 267 and Yamaha at 259. I believe the Mercury comes standard with a SS impeller vs. aluminum with the Yamaha. I didn't know if the actual pump size is the same for each or the performance is any different? Cost on the Mercury is a little less and we have probably one of best Mercury service dealers in the country close by. Yamahas speak for themselves on quality so not a problem there. Just hoping someone has a little experience with either before making a decision?
Here area few pics of the what I started with and current condition. Stripped the original center console tower and going with a grab bar and tiller. Also coated bottom with GatorGlide and currently working on the Tuff Coat for the deck.
Thanks for the help!