oldude
Active member
I have read hundreds of topics on the boat, trailer, motor, electrical forums. The more I read the more confused I get. For example I was looking at the bottom of my boat last night and I saw this patch. I thought all I need to do is clean out the silicon and put 3m5200 to fix the seam. Then I read more about the 5200 it causes corrosion on bare aluminum. It's an adhesive more so than a sealant etc. I haven't had a boat since the early 80's and that was a brand new Buck Perry spoon pluggers boat that I drove out to Butler PA to get along with a new trailer and 20hp merc tiller. There is so much info on this site, but I just need to learn how to sort it out.
My trailer is a ez loader roller style and I'm wondering if that is what caused the problem on the boat.
The patch is about where the front roller is on the rear of the trailer.
Thank you all for the posts, pics and info that is on tinboats
My trailer is a ez loader roller style and I'm wondering if that is what caused the problem on the boat.
The patch is about where the front roller is on the rear of the trailer.
Thank you all for the posts, pics and info that is on tinboats