mainjet
Active member
I have an old 14' alumacraft that I want to put some flooring in. But the floor supports do not have home in them to let the water drain from front to back so that it will get to the bilge or transom drain. Is there anything detrimental to the boat to drill a couple small to medium (1/4") holes int he center of the supports to let the water drain back?
I was thinking to drill a 1/4" hole in the larger ribs right in the center of each in the center, just above the boat floor.
I was thinking to drill a 1/4" hole in the larger ribs right in the center of each in the center, just above the boat floor.