Took my boat down to Union Lake(maiden voyage this year) Everything was going smoothly till I went turn on my Lowrance, nothing, went to the middle of the lake, shut the motor off, and checked the wireing and couldnt find anything. I dont like to have things not working, so I put her back on the trailer and left, didnt even fish :shock: .
Got home and started pulling the wires for the depth finder, got to the batteries & everythings good, no blown fuse. I got some wire and hooked it to the bat. and the Lowrance, it worked, the fuse holder was bad. I replaced that. I have this corrigated plastic wrap that the wires run through, I;m running new wire and the corrigated wrap is messed up at one section so I cut it out, I looked down and and saw 1/4 inch peace of wire laying on the deck, I also cut the cable to the speedometer, CRAP!!! I spliced it back together, but will it work? This little project took 4 1/2 hrs. Noon till 4.30. Sorry its so long but I had to let you know how my day went.
Got home and started pulling the wires for the depth finder, got to the batteries & everythings good, no blown fuse. I got some wire and hooked it to the bat. and the Lowrance, it worked, the fuse holder was bad. I replaced that. I have this corrigated plastic wrap that the wires run through, I;m running new wire and the corrigated wrap is messed up at one section so I cut it out, I looked down and and saw 1/4 inch peace of wire laying on the deck, I also cut the cable to the speedometer, CRAP!!! I spliced it back together, but will it work? This little project took 4 1/2 hrs. Noon till 4.30. Sorry its so long but I had to let you know how my day went.