MrGiggles
Well-known member
Got a bit of an issue with my Tracker V17. Been chasing a hull leak that turned out to not exist.
If at any point the boat begins to list while cruising, a lot of spray runs down the low side of the hull. Some of that water gets under the transom caps, turns 90 degrees, and ends up in the bilge.
What is a good product to use to fill the gaps up? Seems to me like 5200 is too runny.
If at any point the boat begins to list while cruising, a lot of spray runs down the low side of the hull. Some of that water gets under the transom caps, turns 90 degrees, and ends up in the bilge.
What is a good product to use to fill the gaps up? Seems to me like 5200 is too runny.