cprado
Member
- Joined
- Mar 26, 2020
- Messages
- 5
- Reaction score
- 0
Good afternoon everyone,
Hope everyone is doing well and safe. I'm in the middle of wiring a few projects thought I'd try to knock it all out at once. And my apologies in advance for the lengthy post. I'm comfortable running wiring when I know what needs to go where, but looking for help on the following please.
1) 2-wire bow light wiring.
2) 2-wire 12v horn placement advice.
3) 2-wire 12v horn wiring.
4) 2-wire 2-pin stern light placement advice.
5) 2-wire 12v 2-pin stern light wiring.
6) Can my Evinrude Simplex control box can be wired with a lanyard kill switch and if yes how?
I've tried doing research online and don't know if it's as simple as just connective positive, negatige and ground wires appropriately, but some research shows wiring using a relay, SPDT or DPDT.
I've attached pictures to show how I think wiring needs to be connected.
And I'm also looking for advice on placement of two items (#2 and 4). Regarding the horn placement, there will also be two cleats placed on perimeter halfway down hood on left and right and I'd like to add a vintage mountable spot light in front of the driver windshield on the corner perimeter. If you zoom in close enough you can see the pre-drilled holes for cleats by the bimini mounts.
I've tried to make responding easy by numbering my questions if you wanted to do the same.
A couple of friends got me into antique boats and my first is the 1959 Orlando Clipper. Love these vintage boats... the simplicity... the ease of working on them without taking to a repair shop... and the classic look to these boats. Any advice would be much appreciated.
Thanks and hope everyone has a great day!
Hope everyone is doing well and safe. I'm in the middle of wiring a few projects thought I'd try to knock it all out at once. And my apologies in advance for the lengthy post. I'm comfortable running wiring when I know what needs to go where, but looking for help on the following please.
1) 2-wire bow light wiring.
2) 2-wire 12v horn placement advice.
3) 2-wire 12v horn wiring.
4) 2-wire 2-pin stern light placement advice.
5) 2-wire 12v 2-pin stern light wiring.
6) Can my Evinrude Simplex control box can be wired with a lanyard kill switch and if yes how?
I've tried doing research online and don't know if it's as simple as just connective positive, negatige and ground wires appropriately, but some research shows wiring using a relay, SPDT or DPDT.
I've attached pictures to show how I think wiring needs to be connected.
And I'm also looking for advice on placement of two items (#2 and 4). Regarding the horn placement, there will also be two cleats placed on perimeter halfway down hood on left and right and I'd like to add a vintage mountable spot light in front of the driver windshield on the corner perimeter. If you zoom in close enough you can see the pre-drilled holes for cleats by the bimini mounts.
I've tried to make responding easy by numbering my questions if you wanted to do the same.
A couple of friends got me into antique boats and my first is the 1959 Orlando Clipper. Love these vintage boats... the simplicity... the ease of working on them without taking to a repair shop... and the classic look to these boats. Any advice would be much appreciated.
Thanks and hope everyone has a great day!
Attachments
-
Bow Light2.jpg1 MB · Views: 271
-
Dash Rearview3.jpg1.2 MB · Views: 271
-
Dash Rearview2.jpg1.1 MB · Views: 271
-
Dash Rearview1.jpg1.2 MB · Views: 271
-
Control Box.jpg1.2 MB · Views: 271
-
Dash.jpg1.2 MB · Views: 271
-
Stern.jpg1.7 MB · Views: 271
-
Bow.jpg1.2 MB · Views: 271
-
Bow Light.jpg1.3 MB · Views: 271
-
push button horn.jpeg5.4 KB · Views: 271