Redneck Camera Pod - The Yote Pod

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jim

Well-known member
TinBoats Supporter
Joined
Nov 29, 2006
Messages
18,305
Reaction score
23
Location
Shrewsbury, MA
If this is not the cheapest, simplest, most brilliant idea, nothing is. I bet everyone has these parts just laying around:

Saw this on a fishing forum and thought I would share.

pretty simple to make for you guys that fish alone.One thing missing in the pics is a nut to stop the camera from being screwed in to far super glue the nut in place

CIMG0004-1.jpg


CIMG0005-1.jpg


CIMG0006-1.jpg
 
Been there and done that. Except I used a C clamp type and clamped it down tight to the handlebar of my motor cycle (years ago) All my parts were welded so it didn't slip and slide down the road while I was moving. Worked pretty well for me.

Nice idea to share.
 
redbug said:
just spend $20 and be done with it...

https://www.geoindustries.net/lilypod.htm

Thats a good idea but lets see you use it from something other than a boat .A lot guys do fish from shore( just sayin)
 
Yote said:
redbug said:
just spend $20 and be done with it...

https://www.geoindustries.net/lilypod.htm

Thats a good idea but lets see you use it from something other than a boat .A lot guys do fish from shore( just sayin)

I use something like this:

216726278.jpg



But hey - it costs $7.75
https://www.buy.com/prod/vidpro-gp-12-gripster-ii-flexible-compact-camera-mini-tripod-grey/q/sellerid/18752638/loc/111/216726278.html
 
i have the gorillapod also for my rare shore fishing outings they also work great and are dirt cheap
 
Top