TinBoats.net
The original aluminum boat site!
bracing
- Thread starter cullen
- Start date
Help Support TinBoats.net:
russ010
Well-known member
the best thing to do would be to run aluminum angle the width of the boat to atleast the height of where the top of the bench was, and you can make that your deck starting point (if you're put a deck).
Otherwise, you'll need to put more ribs up the side welded or riveted to braces stretching the width of the floor.
Otherwise, you'll need to put more ribs up the side welded or riveted to braces stretching the width of the floor.
