prop on 1989 15 hp evinrude

TinBoats.net

Help Support TinBoats.net:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 25, 2010
Messages
11
Reaction score
0
I just purchased a evinrude that has a severely damaged prop. The prop is a 9.25x8 pitch. Is this the right prop. It will be on a deep 14 ft boat with no floor. I would like to buy just one prop, so if anyone has a similiar setup and knows what prop they run and what pitch prop they run would be great. I think someone put a low pitch prop on to troll slower.
 
I think OMC 15hp motors came with 10X13 props from the factory. The 13 pitch will work the way your boat is set up now. If your going to deck out your boat and load it down with gear then you might consider a prop that's 11 or 12 pitch.
 

Latest posts

Top