timberwolves
Member
- Joined
- Sep 1, 2014
- Messages
- 12
- Reaction score
- 0
Hey guys need some help if possible. I am trying to get my boat ready for duck season. I took the motor out of storage changed water pump, gas filter, plugs, lower unit oil etc. Motor runs like a top. After starting and shutting down a few times the pull cord seemed lock up. Not the motor the pull starter. After further inspection I noticed that the cam follower, lever & starter interlock spring was binding up the starter. I moved the lever out of the way and the pull cord starts and rewinds with no problems, the motor starts and runs great. I took the starter interlock washer, spring, cam follower and lever off, and cant seem to put it back on correctly. Not sure how to align things up and wind or unwind the spring. Any help would be great, thanks John.