cavman138
Well-known member
Just wondering if anyone has used a clearcoat and if you have what did you use? Pros and Cons?
dyeguy1212 said:Overall it seems like a bad idea because for the most part I'd have to guess a clear coat is going to dry really hard (like an automotive clear coat) and is going to crack as the hull flexes.
dyeguy1212 said:Overall it seems like a bad idea because for the most part I'd have to guess a clear coat is going to dry really hard (like an automotive clear coat) and is going to crack as the hull flexes.
perchin said:dyeguy1212 said:Overall it seems like a bad idea because for the most part I'd have to guess a clear coat is going to dry really hard (like an automotive clear coat) and is going to crack as the hull flexes.
I disagree with it cracking. Next time you see a dent in an automobile, look at it and chances are there are no cracks in the clearcoat.... Ive personally pulled apart doors with dents from the inside and pushed them out.....<-------------- no damage left behind. I've also used clear-coat on an old bow.... It bends every time it was pulled without any cracking. Just my humble opinion...... seems I have to specify lately....not trying to argue.
Brine said:I've emailed a guy who did his jon boat with it, and he said it had held up very well. Here is his link.
https://userpages.sofnet.com/robertg/boat.htm
Brine said:I've emailed a guy who did his jon boat with it, and he said it had held up very well. Here is his link.
https://userpages.sofnet.com/robertg/boat.htm
Enter your email address to join: